| No. | Brand | H | B | E | a | F | C | c | i |
| MTO-73 | Kaydon | 323 mm | - | - | - | - | - | - | - |
| VU300574 | INA | - | - | - | - | - | - | - | - |
| XSI140944-N | INA | - | - | - | - | - | - | - | - |
| XSI140544-N | INA | - | - | - | - | - | - | - | - |
| VSI250855-N | INA | - | - | - | - | - | - | - | - |
| VLA200544-N | INA | - | - | - | - | - | - | - | - |
| 16374001 | Kaydon | - | - | - | - | 5.875 in | 9.3750 in | - | - |
| VLI200944-N | INA | - | - | - | - | - | - | - | - |
| RK6-43N1Z | Kaydon | - | 7 mm | - | - | - | - | - | - |
| 16370001 | Kaydon | - | - | - | - | - | - | - | - |
| 16327001 | Kaydon | - | 16 mm | - | - | - | - | - | - |
| XSU080188 | INA | - | - | - | - | - | - | - | - |
| XA200352-H | INA | - | - | - | - | - | - | - | - |
| 16275001 | Kaydon | - | - | - | - | - | - | - | - |
| 16350001 | Kaydon | - | 35 mm | - | - | - | - | - | - |
| HT10-42P1Z | Kaydon | - | - | - | - | - | - | - | - |
| VSI251055-N | INA | - | 18 mm | - | - | - | - | - | - |
| XU060111 | INA | - | - | - | - | - | - | - | - |
| 16352001 | Kaydon | - | - | - | - | - | - | - | - |
| 16393001 | Kaydon | - | 17.5 mm | - | - | - | - | - | - |
| XU08043 | INA | - | 52 mm | - | - | - | - | - | - |
| 16317001 | Kaydon | - | - | - | - | - | - | - | - |
| XSU140844 | INA | - | - | - | - | - | - | - | - |
| MTE-73 | Kaydon | - | - | - | - | - | - | - | - |
| XU160405 | INA | - | - | - | - | - | - | - | - |
| XSI140744-N | INA | - | - | - | - | - | - | - | - |
| HS6-33E1Z | Kaydon | - | 200 mm | - | - | - | - | - | - |
| 16266001 | Kaydon | - | 33 mm | - | 26.7 mm | - | - | - | - |
| VU20022 | INA | - | - | - | - | - | - | - | - |
| 16314001 Kaydon Slewing Ring Bearings | Y1 - Geometry Factor:2.90; e - Geometry Factor:0.23; Dimension L:4.96 in; C - Dynamic Load (Basic):79700 lb; Eng Internal Radial Clearance - Max:0.0039; Pre Install Clearance Max:0.0039 in; UPC Code:0883450093828; Grease Lubrication - T Seal:2000 rpm; Grease Lubrication - B/C/O Seal:1000 rpm; Bearing Number:22218; Shaft Tolerance:0.0030 in; Dimension E:3.00 in; Housing Style:Four-Bolt Pillow Blo; Full Timken Part Number:QMPX18J303SB; |
| VSU250955 INA Slewing Ring Bearings | Weight:1.1 Kg; d1:2 15/16 in; L1:63.00 mm; Locknut:KM17; Lockwasher and Lockplates:MB17; Appropriate Hydraulic Nut:HMV17; C:18 mm; D3:110 mm; G:M85x2; |
| 16278001 Kaydon Slewing Ring Bearings | e - ISO Factor4:0.39; C - Double Cup Width:4.2500 in; D:15.7500 in; K - Factor3:1.48; Design Units:Imperial; Da - Cup Frontface Backing Diameter:14.65 in; Cg - Geometry Factor8:0.15; r - Cup Frontface To Clear Radius2:0.06 in; Y1 - ISO Factor5:1.71; G2 - Heat Generation Factor (Rib-Roller End):207; Y2 - ISO Factor6:2.55; Y - ISO Factor1:1.52; Series:220000; G1 - Heat Generation Factor (Roller-Raceway)7:1320; |
| 16308001 Kaydon Slewing Ring Bearings | Outside Diameter D:160.000 mm; Outside Ring Width B:26.000 mm; Bore Size d:105 mm; Snap Ring Diameter D2 max:169.700 mm; Radius Rs min:2.000 mm; Weight:1.60 Kg; Clearance:C0 (Normal); Grease Reference Speed:4700 rpm; Snap Ring Width f max:2.820 mm; C0r - Static Load Rating:61.2 kN; Cr - Dynamic Load Rating:69.2 kN; Features:Snap Ring; Oil Reference Speed:6700 rpm; |
| 16321001 Kaydon Slewing Ring Bearings | Cor - Static Load Rating:176025 lbf; Bolt Size:4 x M24; Shipping Weight:431 lb; Maximum Speed:1820 rpm; Cr - Dynamic Load Rating:146800 lbf; Note:This product line wa; Dimension L:20.2 in; Bearing Type:Split Cylindrical Ex; Dimension K:3.2 in; Support Type:Four-Bolt Plummer Bl; Dimension M:6.0 in; Bearing - Housing - Seal:HSM105BXH; Series Type:Heavy Series; Housing Width:7.9 in; Dimension J:17.2 in; |
| VLA200644-N INA Slewing Ring Bearings | Retainer Material:Machined Brass; Bore Type:Tapered Bore; Configuration:Double Row; Dynamic Load Rating:3,700,000 N; da (min):322 mm; Hole Diameter (do):12 mm; Axial Load Factor Y1:2.49; Groove Width A:26 mm; D:540 mm; Center Guidance:Fixed Inner Ring Rib; d:300 mm; Limiting Speed - Oil:1,100 rpm; Da (max):518 mm; Constant e:0.27; Nr. of Holes:8; B:140 mm; Enclosure:Open; ra (max):4 mm; Limiting Speed - Grease:900 rpm; |
| XU08043 INA Slewing Ring Bearings | Radial Clearance:0.120 to 0.170 mm; db (max):214 mm; Configuration:Single Row; Fillet Radius/Chamfer:4 mm; db (min):198 mm; B:52 mm; Dynamic Load Rating:625,000 N; ra (max):3 mm; d:180 mm; Limiting Speed - Grease:1,800 rpm; Static Load Rating:850,000 N; Enclosure:Open; Limiting Speed - Oil:2,200 rpm; r1:4 mm; Da (max):302 mm; Bore Type:Cylindrical Bore; D:320 mm; Inside Ring Outside Diameter:217 mm; |
| HT10-42N1Z Kaydon Slewing Ring Bearings | Dimension C:4.290 in; Dimension B Fix:1.81 in; Dimension N:1.88 in; Pre Install Clearance Min:0.0020 in; C0 - Static Load:54100 lb; Dimension RA:0.06 in; Eng Internal Radial Clearance - Max:0.0031; Dimension H:0.50 in; C - Dynamic Load (Basic):49900 lb; Oil Lubrication - B/C/O Seal:1300 rpm; Dimension G:6.375 in; Dimension KA:1.25 in; Dimension D:6.38 in; Oil Lubrication - M/N Seal:1600 rpm; Shaft Size :2-11/16 in; |
| 16347001 Kaydon Slewing Ring Bearings | Bearing Weight:209.600 Kg; Y0 - ISO Factor4:4.2; d:600.000 mm; B - Inner Ring Width:150 mm; Cage Material:Brass; C1(2) - Dynamic Radial Rating (Two-Rows):3970000 N; D:800.000 mm; e - ISO Factor3:0.16; C0 - Static Radial Rating:8600000 N; Cg - Geometry Factor8:0.1153; Y2 - ISO Factor6:4.11; Design Unit:METRIC; Y1 - ISO Factor5:6.25; r - Outer Ring To Clear Radius2:4.000 mm; B - Outer Ring Width:150.000 mm; |
| MTO-730T Kaydon Slewing Ring Bearings | L:140.00 mm; Weight:4.85 Kg; Appropriate Hydraulic Nut:HMV38; Thread D12:M190x3; Taper:1:12; d1:170.00 mm; Appropriate Withdrawal Nut No.:KM38; b:24 mm; L11:146.00 mm; |
| RK6-43E1Z Kaydon Slewing Ring Bearings | G1 - Heat Generation Factor (Roller-Raceway):44.1; Db - Cup Backface Backing Diameter:99.06 mm; Da - Cup Frontface Backing Diameter:103.89 mm; a - Effective Center Location3:-1.8 mm; D:110.000 mm; Cage Type:Stamped Steel; C1 - Dynamic Radial Rating (1 million revolutions)5:127000 N; R - Cone Backface To Clear Radius1:2.030 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:32900 N; Cg - Geometry Factor:0.082; |
| XSA140544-N INA Slewing Ring Bearings | Cr - Dynamic Load Rating:233127 lbf; Bearing Number:HSE512BX; Dimension L:10.0 in; Dimension H:5.4 in; Dimension T:25.5 in; Shaft Size:5.75 in; Bearing Type:Split Cylindrical Ex; Seal Type:Felt Seal; Support Type:Round Flange; Bolt Size:4 x M24; Bearing UPC:013992055736; Dimension N:19.502 in; Dimension V:0.3 in; Series Type:Heavy Series; Note:This product line wa; Maximum Speed:1220 rpm; Bearing - Housing - Seal:HSE512BXH; |
| RKS.161.14.0414 SKF Slewing Ring Bearings | Fillet Radius/Chamfer:3 mm; Static Load Rating:545,000 N; ra1 (max):2.5 mm; Dynamic Load Rating:435,000 N; dc (min):132 mm; d:100 mm; dd (min):143 mm; D:215 mm; db (max):125 mm; Radial Clearance:0.050 to 0.085 mm; Bore Type:Cylindrical Bore; ra (max):2.5 mm; Da (max):201 mm; Limiting Speed - Grease:2,400 rpm; r1:3 mm; B:73 mm; Enclosure:Open; db (min):114 mm; Inside Ring Outside Diameter:129.5 mm; |
| VU300574 INA Slewing Ring Bearings | Dimension P:0.6 in; Bearing UPC:013992030399; Bearing - Housing - Seal UPC:013992101693; Cor - Static Load Rating:36194 lbf; Dimension L:5.1 in; Dimension T:11.3 in; Bearing - Housing - Seal:LSM70BXHHTPS; Bolt Size:4 x M12; Dimension H:2.9 in; Seal Type:High Temperature Pac; Dimension N:7.563 in; Maximum Speed:3310 rpm; Bearing Type:Split Cylindrical Ex; Dimension V:0.1 in; Cr - Dynamic Load Rating:31024 lbf; |
| XU050077 INA Slewing Ring Bearings | C90 - Dynamic Radial Rating (90 million revolutions)4:160000 lbf; Cone Part Number:EE655270; R - Cone Backface To Clear Radius1:6.35 mm; Aa - Cage-Cone Backface Clearance:8.1 mm; B - Cone Width:92.075 mm; da - Cone Frontface Backing Diameter:713.99 mm; a - Effective Center Location3:54.1 mm; C0 - Static Radial Rating:1420000 lbf; D:876.300 mm; db - Cone Backface Backing Diameter:722.88 mm; Series:655000; |
| RKS.900155101001 SKF Slewing Ring Bearings | da - Cone Frontface Backing Diameter:183.90 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:48800 lbf; C0 - Static Radial Rating:254000 lbf; Ab - Cage-Cone Frontface Clearance:3.3 mm; Bearing Weight:17.3 Kg; Aa - Cage-Cone Backface Clearance:4.6 mm; d:164.976 mm; R - Cone Backface To Clear Radius1:7.110 mm; B - Cone Width:68.001 mm; Cg - Geometry Factor:0.114; B:63.505 mm; e - ISO Factor8:0.32; |
VLA200744-N INA Slewing Ring Bearings Video
VLA200744-N INA • ABF Store
VLA200744-N INA available at ABF.store ✓ Same-day shipment ✓ 8.000.000 bearings and electric motors ✓ Worldwide delivery ✓ Customer Service in 8
INA VLA200744N Bearing, NOKS Bearings
INA VLA200744N Bearing Bearing, INA VLA200744N Bearing Bearings size and price
Four point contact bearings VLA200744-N (Series VLA20)
Four point contact bearings VLA200744-N. (Series VLA20) light series 20, external gear teeth, lip seals on both sides. The datasheet is only an overview of
INA VLA200744-N | Purvis Industries
VLA200744-N. Slewing rings > 440 mm = 900 mm. CP#:; Item#: 347595; Mfr#: VLA200744-N; UPC: 4012802075878. Min. Order Qty: 1; Qty. Interval: 1
VLA200744-N Flanged Four point contact bearing (External
BRS specialized in producing INA Structure VLA200744-N Four point contact bearing (flanged inner ring,external gear teeth), and other precision slewing
Ina USA Corp. | VLA200744-N | SLEWING RING, 4 POINT
Shop Ina USA Corp. VLA200744-N at Applied.com, which includes; Ball Bearing, 634 mm ID, 838.1 mm OD,56 mm Width
INA (Schaeffler) - VLA200744-N - Motion Industries
Buy INA (Schaeffler) Slewing Rings VLA200744-N direct from Motion Industries. Your proven service leader with reliable delivery since 1972
Four point contact bearings - VLA200744-N - medias
Di, 745,5 mm, Tolerance: +0,6/0. Di ZT, 747 mm, Valid for bearings with centring (suffix ZT) Centring lengths (T, t) (see dimension drawing) Tolerance: +IT8