| No. | Brand | H | B | E | a | F | C | c | i |
| RKS.060.20.0414 | SKF | - | - | - | - | - | - | - | - |
| 16267001 | Kaydon | - | - | - | - | - | - | - | - |
| XU120179 | INA | - | 9 mm | - | - | - | - | - | - |
| VA250309-N | INA | - | - | - | - | - | - | - | - |
| RK6-33N1Z | Kaydon | - | - | - | - | - | - | - | - |
| 16284001 | Kaydon | - | - | - | - | - | - | - | - |
| XSU140644 | INA | - | 5 mm | - | - | - | - | - | - |
| HT10-54N1Z | Kaydon | - | - | - | - | - | - | - | - |
| VLA200644-N | INA | - | 140 mm | - | - | - | - | - | - |
| XSU140414 | INA | - | 174 mm | - | - | - | - | - | - |
| VLI200544-N | INA | - | - | - | - | - | - | - | - |
| VSI200844-N | INA | - | - | - | - | - | - | - | - |
| 16369001 | Kaydon | - | - | - | - | - | - | - | - |
| VLA200744-N | INA | - | - | - | - | - | - | - | - |
| XU080149 | INA | - | - | - | - | - | - | - | - |
| 16373001 | Kaydon | 302 mm | - | - | - | - | - | - | - |
| RKS.161.14.0414 | SKF | - | 73 mm | - | - | - | - | - | - |
| 16278001 | Kaydon | - | - | - | - | - | - | - | - |
| 16380001 | Kaydon | - | - | - | - | - | - | - | - |
| 16384001 | Kaydon | - | - | - | - | - | - | - | - |
| VSA200544-N | INA | - | - | - | - | - | - | - | - |
| VLA201094-N | INA | - | - | - | - | - | - | - | - |
| VI160420-N | INA | - | 120 mm | - | - | - | - | - | - |
| MTO-87 | Kaydon | - | - | - | - | - | - | - | - |
| 16388001 | Kaydon | - | - | - | - | - | - | - | - |
| RK6-43P1Z | Kaydon | - | - | - | - | - | - | - | - |
| 16271001 | Kaydon | - | - | - | - | - | - | - | - |
| HT10-30E1Z | Kaydon | - | - | - | - | - | - | - | - |
| 16281001 Kaydon Slewing Ring Bearings | r1:2 mm; Static Load Rating:131,000 N; Limiting Speed - Grease:5,400 rpm; Fillet Radius/Chamfer:2 mm; db (min):60 mm; Enclosure:Open; ra (max):2 mm; dd (min):73 mm; db (max):63 mm; Inside Ring Outside Diameter:65 mm; dc (min):67 mm; Dynamic Load Rating:121,000 N; ra1 (max):2 mm; Bore Type:Cylindrical Bore; D:110 mm; d:50 mm; Da (max):100 mm; Configuration:Single Row; B:40 mm; Radial Clearance:0.030 to 0.060 mm; |
| XU060111 INA Slewing Ring Bearings | do - Ball Diameter:4.762500 mm; D:42 mm; Limiting Speed (Oil):62600 rpm; Cage Type:CR - Phenolic Outer; Contact Angle:25 º; Ce - Dynamic Radial Rating1:8590 N; Ball Type:STEEL; Bearing Width:9 mm; Da - Outer Ring Backing Diameter:38.700 mm; da - Inner Ring Backing Diameter:28.900 mm; R - Inner Ring To Clear Radius2:0.3 mm; d:25 mm; Bearing Weight:0.04 Kg; r - Outer Ring To Clear Radius3:0.3 mm; Limiting Speed (Grease):31300 rpm; |
| RK6-43E1Z Kaydon Slewing Ring Bearings | G1 - Heat Generation Factor (Roller-Raceway):44.1; Db - Cup Backface Backing Diameter:99.06 mm; Da - Cup Frontface Backing Diameter:103.89 mm; a - Effective Center Location3:-1.8 mm; D:110.000 mm; Cage Type:Stamped Steel; C1 - Dynamic Radial Rating (1 million revolutions)5:127000 N; R - Cone Backface To Clear Radius1:2.030 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:32900 N; Cg - Geometry Factor:0.082; |
| HT10-60P1Z Kaydon Slewing Ring Bearings | Dimension P:1.374 in; Dynamic Load Rating:3490 lbf; Series:Standard; Dimension T:0.874 in; Center of Bearing from End S:7.49 mm; Height H2:57.2 mm; Shaft Size d:15/16 in; Weight:3.21 lb; Slot Width A1:13.5 mm; Bearing Number:GRA015RRB; Housing Style:Take-Up; Dimension L2:12.70 mm; Inside Ring Width B:21.44 mm; Dimension G:1.780 in; Housing Width A:13.5 in; Total Length L:102.4 mm; Pitch Height H1:76.2 mm; |
| XSU080258 INA Slewing Ring Bearings | Housing Width:13.6 in; Dimension L:43.0 in; Dimension H1:3.0 in; Series Type:Heavy Series; Shaft Size:12 in; Bearing - Housing - Seal:HSE1200BXHHTPS; Dimension H:17.992 in; Support Type:Eight-Bolt Plummer B; Shipping Weight:3322 lb; Bearing - Housing - Seal UPC:013992058492; Pillow/Plummer Block Style:Split Cylindrical Ho; Dimension J1:34.5 in; Dimension K:13.0 in; Dimension M:16.5 in; Bolt Size:8 x M36; |
| XU060094 INA Slewing Ring Bearings | Y2 - ISO Factor10:2.31; Bearing Weight:6.43 lb; B - Cone Width:1.1875 in; C - Double Cup Width:2.125 in; T - Bearing Width across Cones:2.6249 in; db - Cone Backface Backing Diameter:3.19 in; Cage Type:Stamped Steel; Cg - Geometry Factor12:0.116; d:2.6250 in; Cup Part Number:33462DC; Design Units:Imperial; Da - Cup Frontface Backing Diameter:4.45 in; Cone Part Number:33262; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:6020 lbf; |
| 16350001 Kaydon Slewing Ring Bearings | ra (max):2 mm; Snap Ring Width:2.8 mm; Radial Clearance:0.025 to 0.051 mm; Limiting Speed - Grease:4,600 rpm; Dynamic Load Rating:104,000 N; Cy (max):7.3 mm; Da (max):138 mm; Dx (min):162 mm; Bore Type:Cylindrical Bore; B:35 mm; d:70 mm; Static Load Rating:68,000 N; r1:0.5 mm; a (max):4.9 mm; Fillet Radius/Chamfer:2.1 mm; Configuration:Single Row; Factor fo:13.2; da (min):82 mm; Snap Ring Outside Diameter:159.7 mm; |
| VLI200744-N INA Slewing Ring Bearings | Static Load Rating:6609 lbf; Total Length H:224.00 mm; Center of Bearing from Housing End A2:25.00 mm; Dimension A0:2.25 in; Shaft Size d:50 mm; Bearing Unit - Adapter Sleeve:UK211 - H2311; Dynamic Load Rating:9757 lbf; Bolt Hole Spacing J:184.00 mm; Housing Style:Two-Bolt Flange; Weight:7.3 lb; Bolt Size:M16; Bolt Hole Size N:19.00 mm; Total Height L:130.00 mm; Flange Thickness A1:18.00 mm; Center of Bearing from Bearing End Y:32 mm; |
| MTO-730T Kaydon Slewing Ring Bearings | L:140.00 mm; Weight:4.85 Kg; Appropriate Hydraulic Nut:HMV38; Thread D12:M190x3; Taper:1:12; d1:170.00 mm; Appropriate Withdrawal Nut No.:KM38; b:24 mm; L11:146.00 mm; |
| MTO-705T Kaydon Slewing Ring Bearings | db - Cone Backface Backing Diameter:10.79 in; da - Cone Frontface Backing Diameter:10.63 in; T - Bearing Width to Flange:1.1875 in; Y - ISO Factor9:1.8; Aa - Cage-Cone Backface Clearance:0.28 in; Cup Part Number:M249710-B; Ab - Cage-Cone Frontface Clearance:0.17 in; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:30300 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:206000 lbf; Cone Part Number:M249749; |
| XSU140414 INA Slewing Ring Bearings | Dynamic Load Rating:3,950,000 N; ra (max):4 mm; D:480 mm; Retainer Material:Machined Brass; Radial Clearance:0.220 to 0.300 mm; Axial Load Factor Y2:2.65; Constant e:0.38; Enclosure:Open; Configuration:Double Row; Axial Load Factor Y1:1.78; Da (max):458 mm; da (min):282 mm; Nr. of Holes:6; Hole Diameter (do):15 mm; B:174 mm; Limiting Speed - Oil:1,000 rpm; Bore Type:Tapered Bore; Static Load Rating:4,800,000 N; |
| MTE-705 Kaydon Slewing Ring Bearings | C:159 mm; E:366 mm; Static Load Rating:3,100,000 N; f (max):6 mm; Bore Type:Cylindrical Bore; Weight:52.000 kg; Configuration:Double Row; Dynamic Load Rating:1,500,000 N; c:4 mm; Enclosure:Double Seal; d:220 mm; D:340 mm; Fillet Radius/Chamfer:1.5 mm; C1:126.2 mm; B:160 mm; Limiting Speed - Oil:450 rpm; |
| XSU140544 INA Slewing Ring Bearings | Bearing Number:LSM90BR; Cor - Static Load Rating:51931 lbf; Shaft Size:90 mm; Dimension Y:0.6 in; Series Type:Light Series; Seal Type:Viton Single Lip; Dimension P:0.9 in; Ca - Axial Load Rating:2787.59 lbf; Cr - Dynamic Load Rating:42039 lbf; Dimension U:0.2 in; Dimension V:5.5 in; Dimension H:1.6 in; Maximum Speed:2790 rpm; Bearing - Housing - Seal:LSM90BRHRSS; Bearing - Housing - Seal UPC:013992066701; |
| 16369001 Kaydon Slewing Ring Bearings | Housing Style:Round Flange; Dimension L Fix:3.09 in; Grease Lubrication - M/N Seal:650 rpm; Shaft Size :5 in; Pre Install Clearance Min:0.160 mm; Shaft Size Type:Imperial; C - Dynamic Load (Basic):194000 lb; Grease Lubrication - T Seal:900 rpm; Engineering Group:Mounted Bearing; Y1 - Geometry Factor:2.67; Dimension J (Bolt Size):1.125 in; UPC Code:0883450092548; Dimension SV:3.14 in; Dimension L Exp:3.17 in; |
| HT10-42P1Z Kaydon Slewing Ring Bearings | Bearing - Housing - Seal UPC:013992074997; Cor - Static Load Rating:111505 lbf; Dimension U:0.2 in; Series Type:Light Series; Support Type:Take-Up; Shaft Size:125 mm; Ca - Axial Load Rating:4990.69 lbf; Dimension V:7.5 in; Bearing UPC:013992028273; Seal Type:High Temperature Pac; Dimension N:16.5 in; Maximum Speed:1740 rpm; Bearing Type:Split Cylindrical Re; Dimension D:15.0 in; Dimension P:1.0 in; |
| 16304001 Kaydon Slewing Ring Bearings | Design Units:METRIC; Cage Type:Stamped Steel; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:39500 N; R - Cone Backface To Clear Radius3:2.030 mm; B - Cone Width:32.000 mm; C0 - Static Radial Rating:274000 N; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:78800 lbf; d:95 mm; Cone Part Number:X32019XM; db - Cone Backface Backing Diameter:107 mm; Cg - Geometry Factor:0.124; K - Factor8:1.32; |
XU120222 INA Slewing Ring Bearings Video
INA XU120222, Crossed Roller/Slewing Bearing ... - eBay
INA XU120222, Crossed Roller/Slewing Bearing, 140mm Inner Diameter, 300mm Outer Diameter, 36mm Width Series-XU. Item is guaranteed to not be DOA for
XU120222 Slewing ring crossed roller
XU120222 Slewing ring crossed roller. ... Actual product may vary. Print Product; FAQ. Brand: INA Bearing; Model: XU120222; Condition: NEW; SKU: 2169286
XU120222 INA • ABF Store
XU120222 INA. Slewing ring, crossed roller bearing, without gear teeth. XU120222 INA. 1 pc in basket. Update. 1 pc on quote list. Update. Add. Add to quote list
INA XU120222 Crossed roller bearing - DKS bearing Co.,Ltd
Due to the X arrangement of the rolling elements, INA XU120222 Crossed roller bearings can support radial forces and axial forces from both directions
CBT Company. XU120222 INA | INA XU120222
XU120222 INA. Crossed roller bearing. Manufacturer: INA. Manufacturer part number: XU120222. Availability: Ships in 3-5 days. Estimated dates are contingent
INA XU120222 SLEWING RING: : Industrial
Brand Name, INA. Number of Items, 1. Part Number, XU120222. UNSPSC Code, 40000000. See more. See more product details. Customers also shopped for
INA XU120222 Crossed Roller/slewing Bearing 140mm ID
Find many great new & used options and get the best deals for INA XU120222 Crossed Roller/slewing Bearing 140mm ID 300mm OD Series-xu at the best
Crossed roller bearings XU120222 (Series XU) - medias
Crossed roller bearings XU120222 (Series. XU) without gear teeth, sealed on both sides. The datasheet is only an overview of dimensions and basic load